Commercial | Residential | Multifamily | Wall
Use on walls and ceilings up to 30 feet high
Optimized to place behind rain screen exteriors, Thermax™ XARMOR™ (ci) Exterior Insulation is the toughest insulation available for the Thermax™ Wall System. A 4.0 mil embossed exterior foil facer provides durability and long-term performance.
Featured Resources
Thermax™ XARMOR™ (ci)
Thermax™ XARMOR™ (ci)* is the toughest insulation for the patented Thermax™ Wall System. Designed for continuous insulation, Thermax™ XARMOR™ (ci)’s glass-fiber-reinforced polyisocyanurate foam core is homogenous – featuring finer cell size and better cell orientation, reducing wormholes and knit lines – resulting in one of the highest R-values(2) available (R-6.5 at 1”) for immediate insulation and weather protection on the job site, as well as long-term thermal performance.
Caractéristiques et avantages
| Easy to cut, handle, and install |
|
| Moisture Resistant |
|
Physical Properties
| Method | Unit | Value | |
|---|---|---|---|
| Thermal Resistance<sup>1</sup> | ASTM C518 | R-value, min | 6.5 |
| Compressive Strength<sup>2</sup> | ASTM D1621 | psi, min. | 25 |
| Water Absorption<sup></sup> | ASTM C209 | % by volume, max. | 0.1 |
| Water Vapor Permeance<sup>3</sup> | ASTM E96 | perm, max | <0.04 |
| Maximum Use Temperature<sup></sup> | - | °F | 250 |
| Flexural Strength<sup></sup> | ASTM C203 | psi, min. | 55 |
| Flame Spread<sup></sup> | ASTM E84 | - | 25 |
| Smoke Developed<sup></sup> | ASTM E84 | - | <450 |
1Aged R-value at 1” of cured foam @ 75°F mean temperature. R-value expressed in ft2 •h•°F/Btu. R-value determined by ASTM C518 using the aging process in ASTM C1289 (90 days @ 140°F)
2Vertical compressive strength is measured at 10 percent deformation or at yield, whichever occurs first.
3Calculated flammability values for this or any other material are not intended to represent hazards that may be present under actual fire conditions.
Follow DuPont PBS
Follow Tyvek® Construction
© 2020 DuPont de Nemours, Inc. All rights reserved. DuPont™, the DuPont Oval Logo, and all products, unless otherwise noted, denoted with ™, ℠ or ® are trademarks, service marks or registered trademarks of affiliates of DuPont de Nemours, Inc.